Manitou MLA 7-75 H-Z
The Manitou MLA 7-75 H-Z is the largest wheel loader in the MLA range with a standard lift arm, with a 55.4 kW (74.3 hp) Stage V engine, an unladen weight of 4,781 kg and a static tipping load of 3,378 kg with bucket. It has a Z-kinematic loader arm and a breakout force of 5,906 daN.
- Engine power
- 55,4 / 74,3 kW/ HK
- Operating Weight
- 4,781 t
- Tipping load
- 2,741 - 3,378 t
Description
The Manitou MLA 7-75 H-Z is the largest wheel loader in the range with a standard lift arm. Like the smaller units, it makes no compromises in comfort and performance. The loader arm has Z-kinematics, which gives extra breakout force, return to dig and parallel guidance. MLA is Manitou’s designation for articulated loaders.
According to the Manitou MLA 7-75 H-Z product page, the machine has a 55.4 kW (74.3 hp) engine and an unladen weight of 4,781 kg (with forks and a 4-post canopy). Static tipping load is 3,378 kg with bucket (straight) and 2,621 kg (full turn), and 2,741 kg with forks (straight) and 2,174 kg (full turn). Maximum height of the bucket pivot point is 3.47 m, and maximum lifting height (below forks) is 3.28 m. Breakout force with bucket is 5,906 daN. The MLA 7-75 H-Z is part of the range of Manitou wheel loaders at Hesselberg.
The machine has a four-cylinder Deutz TD 3.6 L4 engine that meets Stage V, with a torque of 330 Nm at 1,600 rpm. The transmission is hydrostatic with two gears forward and reverse, and Manitou states that it is smooth at low speed and very powerful in demanding circumstances. Top speed is 30 km/h, and 20 km/h when laden. Front and rear differential lock is standard, and gearshift and 100% diff lock are controlled from the joystick. The hydraulics deliver 70 l/min at 200 bar, and the high-flow option delivers 110 l/min. The fuel tank holds 102 litres and the hydraulic tank 74 litres.
The machine is 1.74 m wide (less bucket) and 4.44 m long (less bucket). The wheelbase is 2.06 m, the articulation angle is 45° and the ground clearance is 0.31 m. The cab is ROPS and FOPS certified (level 1), and vibration on hands and arms is below 2.5 m/s².
Manitou offers 30 km/h and lift arm suspension as options, so you can move from one job site to another in full comfort. The machine suits both agriculture and construction.
If you need a smaller machine, take a look at the MLA 6-65 H-Z. The MLA 7-75 H-Z has higher engine output (55.4 kW vs 48.5 kW), tipping load with bucket (3,378 kg vs 2,907 kg) and unladen weight (4,781 kg vs 4,150 kg).
If you will be operating the machine yourself, you can read more about our heavy equipment operator course.
As the supplier of Manitou in Norway, Hesselberg helps you with machine selection, service and parts. Contact us for a no-obligation quote on the MLA 7-75 H-Z.