Manitou MLA-T 516-75 H
The Manitou MLA-T 516-75 H is a telescopic wheel loader with an articulated chassis, a 55.4 kW (74.3 hp) Stage V engine, an unladen weight of 5,543 kg and a bucket pivot height of 5.03 m. It combines the reach of a telescopic boom with the agility of an articulated chassis.
- Engine power
- 55,4 / 74,3 kW/ HK
- Operating Weight
- 5,543 t
- Tipping load
- 2,732 - 3,535 t
Description
The Manitou MLA-T 516-75 H is a smaller telescopic wheel loader that combines the strength of a telescopic boom with an articulated chassis. This gives the manoeuvrability that is often requested when working inside buildings, together with the extra reach that is important in modern farming.
According to the Manitou MLA-T 516-75 H product page, the machine has a 55.4 kW (74.3 hp) engine and an unladen weight of 5,543 kg (with forks and a 4-post canopy). Static tipping load is 3,535 kg with bucket (straight), and 2,732 kg with forks (straight) and 2,000 kg (full turn). Maximum payload with forks according to EN 474-3 (80%) is 1,600 kg. Maximum height of the bucket pivot point is 5.03 m, maximum lifting height (below forks) is 4.84 m, and maximum outreach is 3.30 m. The MLA-T 516-75 H is part of the range of Manitou wheel loaders at Hesselberg.
The machine has a four-cylinder Deutz TD 3.6 L4 engine that meets Stage V, with a torque of 330 Nm at 1,600 rpm. The transmission is hydrostatic with two gears forward and reverse and gives power and smoothness when needed. Top speed is 30 km/h, and 20 km/h when laden. Front and rear differential lock is standard. The hydraulics deliver 70 l/min at 200 bar, and the high-flow option delivers 110 l/min. The machine has flow-sharing hydraulics, which gives combined movements and total control for the operator. The fuel tank holds 102 litres and the hydraulic tank 74 litres.
The machine is 1.74 m wide (less bucket) and 4.95 m long (less bucket). The articulation angle is 44° and the ground clearance is 0.31 m. The cab is ROPS and FOPS certified (level 1), and vibration on hands and arms is below 2.5 m/s².
Manitou states true 360° visibility, which lets the operator gain productivity in safe conditions. The operator station is fully adjustable.
If you need a machine without a telescopic boom, take a look at the MLA 7-75 H-Z, which has the same engine and transmission. The MLA-T 516-75 H has a tipping load with bucket of 3,535 kg vs 3,378 kg and an unladen weight of 5,543 kg vs 4,781 kg, and reaches much higher (5.03 m vs 3.47 m to the pivot point).
If you will be operating the machine yourself, you can read more about our heavy equipment operator course.
As the supplier of Manitou in Norway, Hesselberg helps you with machine selection, service and parts. Contact us for a no-obligation quote on the MLA-T 516-75 H.