STILL RCD 100-180
The STILL RCD 100-180 is a diesel counterbalance truck for heavy loads from 10 to 18 tonnes, with a hydrodynamic drive line and lift height up to 7,000 mm. The entire driver’s workspace can be rotated 180 degrees for better visibility with large loads.
- Lifting height
- 0- 7000 mm
- Lifting capasity
- 10-18 tonn
- Engine power
- Diesel
- Model
- Classic Line
Description
The STILL RCD 100-180 is a diesel counterbalance truck for heavy and bulky loads, built for demanding work both outdoors and indoors. The designation RCD 100-180 refers to STILL’s RCD series of heavy-duty counterbalance trucks, where the numbers 100 to 180 indicate a load capacity from 10 to 18 tonnes. STILL describes the truck as having efficient and powerful common rail turbo engines and low fuel consumption.
The series comprises the models RCD 100, 120, 140, 150, 160 and 180, with load capacities from 10,000 to 18,000 kg. Maximum lift height is 6,500 mm on the RCD 100/600 and RCD 120/600 and 7,000 mm on the other variants, and travel speed is stated at between 25 and 28.8 km/h, depending on the model. See the full model description at the supplier: STILL RCD 10–18 t at STILL. See more trucks in the same class at Hesselberg: heavy-duty forklifts from STILL.
The truck is diesel-powered with a hydrodynamic drive line (torque converter). STILL states that tested comparative work cycles show lower consumption than all other torque converter trucks, and that emissions are well below the limit values currently required. STILL also states that the hydraulics are precise, giving sensitive control of the lifting functions. A wide range of fork carriages and attachments is available for the truck, and the RCD 100 and RCD 120 can be supplied with a narrow track width for confined work areas.
When large loads block the view to the front, the entire driver’s workspace, including the control elements, can be rotated by 180 degrees. The workspace is decoupled from the chassis with rubber bearings, which STILL states gives a roomy, low-vibration workstation, and the control elements can be individually adjusted to the driver. The truck has a sloping counterweight, a visibility-optimised lifting frame and an armoured glass roof window for a clear view all around, and the exhaust pipe is integrated into the chassis for a clear view when reversing. An automatic parking brake, large non-slip steps and an emergency hammer are part of the safety equipment. Seat belt control, which automatically reduces driving speed if the belt is not fastened, and a fire extinguisher are optional. For fleet management, an optional interface to software such as STILL neXXt fleet is available.
The Linde HT100–HT180 is an alternative in the same capacity class, from 10 to 18 tonnes, with a diesel engine and hydrodynamic drive line, and Hesselberg states a maximum lift height of 9,500 mm. The Linde H100–H180 has the same capacity range but uses hydrostatic direct drive without a gearbox. See both at Hesselberg: Linde HT100–HT180 and Linde H100–H180.
As a STILL supplier in Norway, Hesselberg helps you with machine selection, service and parts. Contact us for a no-obligation quote on the RCD 100-180.


